How to Clean your Keyboard-Part 2

By: Ray Geide

When it comes to cleaning your keyboard there are many methods that can be used, some harder and more effective than others.

The easiest method is the Shake Method. It is so easy that you can do it right now. Pick up your keyboard, turn it over being careful not to press any keys, and shake it. See all of that stuff fall out? It is dirtier than you thought, isn't it? You can use one of the following methods to clean it further.

The Blow Method - You can buy cans of pressurized air at the computer department or computer store which are made especially for cleaning your computer. They usually have either a hose and nozzle or a tube extending from the nozzle. Hold the keyboard up vertically (that means that end of the keyboard is up and the other end is down), aim towards the keys and press the button. Keep blowing until all of the debris is blown out. Be sure to get around and in between all of the keys. This can be done with the computer on, but it is better if it is off so that you do not have to worry about pressing the keys and coming up with a page of aaaaaaaaaaaaaaaaaaaaa's.

The Vacuum Method - This is just like the Blow Method except that a vacuum is used instead of a can of pressurized air. It is quite simple. Just turn the vacuum on, pull out the hose, and run the nozzle over the keys. Before doing this make sure your keyboard does not have any loose pop off keys that could be sucked into the vacuum.

The Cotton Ball Method - This can be done in addition to the above methods and in lieu of the following methods. Take a cotton ball or cloth and wet it with rubbing alcohol. It should not be so wet that the alcohol runs down into the cracks of the keyboard. Wipe the tops and sides of the keys.

The Dishwasher Method - I hesitate to tell about this method because there is the possibility that it could fry your keyboard. When I had less experience with computers, I dunked my keyboard in a sink full of water to clean it. It did work afterwards, so I don't doubt those who say this method will not mess up your keyboard, but if it does, don't complain to me. I warned you. If your keyboard is not the standard membrane type of keyboard or if it is on a laptop, do not even think of trying this.

This is how you do it. Unplug the keyboard and place it face down in an empty dishwasher. Do not disassemble the keyboard and do not put it in a dishwasher that has dirty dishes in it. Some say to add soap, some say not to. Run the dishwasher through a regular cycle. Take the keyboard out, shake the water out, and stand it on end until it is completely dry (this may take several days). If it does not work after doing this, it may not be dry. Let it stand another week and try it again. If it still does not work, I warned you.

The Disassembly Method - This is the most thorough method, but it should not be done on laptop keyboards or non-standard non-membrane keyboards.

Turn off the computer and unplug the keyboard. Turn the keyboard upside down. You may want to get two books or short boards to place the keyboard on. Position them so that they hold up the keyboard on the edges when it is turned over. This should leave the keys dangling and not touching the books or the floor. This is especially needed when the keyboard's back is off; otherwise the keys will be lifted out of their position by the floor (or whatever surface it is laying on).

Get a screwdriver and remove all of the screws from the back of the keyboard. Lay the keyboard down on the books and carefully remove the back.

Take everything apart and clean thoroughly. It is better to take the keys out one at a time and clean them so that you do not put them back in the wrong place. Wipe each one down with a wet cloth and then with a dry cloth. Any keys that may be hard to put back in, can be cleaned in place without removing them. Wipe around the keys as they sit in place and blow any debris out with your lungs (using compressed air or a vacuum may upset the keys). If you are really brave, you can remove all of the keys at once and give the frame a good wipe down too.

Do a once over and make sure that you have cleaned everything. Then reassemble it all.

Don't forget the keyboard's cable. Wrap a wet cloth around it and wipe it down. It may have an accumulation of grime that needs to be scrubbed off. Also if any of the letters on the keys have rubbed off, you can use a fine point permanent marker to draw the letter back on the key.

Use these cleaning methods and your keyboard will last a long time and be something you can be proud of.

About The Author

Ray Geide writes a free weekly newsletter called Ray's Computer Tips and moderates a discussion board answering computer questions called Computer Q&A.

He is an experienced computer programmer who has been writing top-rated software for over a decade. Though he has written for some big-name companies, he prefers to write for his own company, Super Win Software, Inc. http://www.superwin.com/

How to Clean your Keyboard- Part 1

By: Ray Geide

I know most of you will not heed this advice, but KEYBOARDS CAN MAKE YOU SICK (how's that for tactfulness?). Germs live on your hands and fingers. When you type, many of them jump on to the keyboard. When someone else types on your keyboard, those germs transfer to their fingers. Or when you later type on the same keyboard, those germs reconquer your fingers. Regularly disinfecting the keyboard can prevent this.

To disinfect the keyboard, turn off the computer. Then spray disinfectant on a cloth. Be sure to use disinfectant and not just any type of cleaner because not all cleaners disinfect. Also do not spray the disinfectent directly on the keys. Spray it on the cloth. Wipe down the top and sides of the keys. Give the keys a few minutes to dry off before turning the computer back on.

Now that you know how to do it, you should make it a regular practice to disinfect the keyboard. It's one step towards a healthier you.

So you have your keyboard disinfected and life is great. Then your child spills koolaide all over it. What do you do? There are certain steps that you should take when something, like pop, beer, wine, coffee, milk, or kool-aide, is spilled on the keyboard.

The first thing to do is immediately unplug the keyboard from the back of the computer and turn the keyboard over so that its keys are down. This will allow the liquid to drain out. You will probably want to put a cloth under the keyboard or at least make sure that the surface you have put it on is washable.

Then use the mouse to shut down Windows and turn off the computer (this is important because later you will have to plug the keyboard back into the computer and you should never plug any device into a computer while it is on).

While the keyboard is upside down use a cloth to dry as much of the liquid off as you can. If you have a can of compressed air or a vacuum, while the keyboard is upside down blow or vacuum it out. Then let the keyboard set upside down for at least a night so that it can adequately dry out.

If the liquid that spilled on it was sticky, you may want to follow the extensive cleaning procedure explained in the next article, How to Clean your Keyboard - Part 2.

Liquid spilled on a laptop keyboard can easily reach the hard drive, so turn it over immediately and leave it in that position until it dries.

Keyboards are quite resilient and so it should work when you turn it on again. But if not, another attribute of keyboards is that they are cheap and so it won't cost too much to buy another one.

With these pointers in mind and a quick reaction, you just may save your keyboard from total destruction the next time it gets coated with coffee.

About The Author

Ray Geide writes a free weekly newsletter called Ray's Computer Tips and moderates a discussion board answering computer questions called Computer Q&A.

He is an experienced computer programmer who has been writing top-rated software for over a decade. Though he has written for some big-name companies, he prefers to write for his own company, Super Win Software, Inc. http://www.superwin.com/

A Guide on RSS Tool

By: Terry Leslie

RSS is an abbreviation that has evolved into the following, depending on their versions:

• RDF Site Summary (also known as RSS 0.9; the first version of RSS)
• Rich Site Summary (also known as RSS 0.91; a prototype)
• Really Simple Syndication (also known as RSS 2.0)

Today, RSS stands for 'Really Simple Syndication', and it has the following 7 existing formats or versions:

• 0.90
• 0.91
• 0.92
• 0.93
• 0.94
• 1.0
• 2.0

RSS tools refer to a group of file formats that are designed to share headlines and other web content (this may be a summary or simply 1 to 2 lines of the article), links to the full versions of the content (the full article or post), and even file attachments such as multimedia files. All of these data is delivered in the form of an XML file (XML stands for eXtensible Markup Language), which has the following common names:

• RSS feed
• Webfeed
• RSS stream
• RSS channel


They are typically shown on web pages as an orange rectangle that usually has the letters XML or RSS in it.

RSS feeds can be used to deliver any kind of information. Some of these 'feeds' include:

• Blogs feed - each blog entry is summarized as a feed item. This makes blog posts easier to scan, enabling 'visitors' to zoom in on their items of interest.

• Article feed - this alerts readers whenever there are new articles and web contents available.

• Forum feed - this allows users to receive forum posts and latest discussion topics.

• Schedule feed - this allows users (such as schools, clubs, and other organizations) to broadcast events and announce schedule changes or meeting agendas.

• Discounts or Special feed - this is used to enable users (such as retail and online stores) to 'deliver' latest specials and discounted offers.

• Ego or News Monitoring - this enables users to receive 'filtered' headlines or news that are based on a specific phrase or keyword.

• Industry-specific feed - used by technical professionals in order to market, promote, or communicate with current (and prospective) customers and clients within their specific industries.

RSS feeds enable people to track numerous blogs and news sources at the same time. To produce an RSS feed, all you need is the content or the article that you want to publicize and a validated RSS text file. Once your text file is registered at various aggregators (or 'news readers'), any external site can then capture and display your RSS feed, automatically updating them whenever you update your RSS file.

RSS tools are useful for sites that add or modify their contents on a regular basis. They are especially used for 'web syndication' or activities that involve regular updates and/or publications, such as the following:

• News websites - as used by major news organizations such as Reuters, CNN, and the BBC.
• Marketing
• Bug reports
• Personal weblogs

There are many benefits to using RSS feeds. Aside from being a great supplemental communication method that streamlines the communication needs of various sectors, RSS tools and feeds can also have tremendous benefits in your business, particularly in the field of internet marketing.

RSS tools and feeds provide Internet users with a free (or cheap) and easy advertising or online marketing opportunity for their businesses. Below are some of the RSS features that can help make your internet marketing strategies more effective.

1. Ease in content distribution services. With RSS, your business can be captured and displayed by virtually any external site, giving you an easy way to 'spread out' and advertise them.

2. Ease in regular content updates. With RSS, web contents concerning your business can now be automatically updated on a daily (and even hourly) basis. Internet users will be able to experience 'real time' updates as information in your own file (such as new products and other business-related releases) is changed and modified simultaneously with that of the RSS feeds that people are subscribed to.

3. Custom-made content services. With RSS, visitors can have personalized content services, allowing them total control of the flow and type of information that they receive. Depending on their interests and needs, visitors can subscribe to only those contents that they are looking for (such as real estate or job listings).

4. Increase in (and targeted) traffic. With RSS, traffic will be directed to your site as readers of your content summary (or 1 to 2 lines of your article) who find them interesting are 'forced' to click on a link back to your site.

These are just several of the many things that you can do with RSS. The possibilities are endless, and they are all aimed at providing you with an effective internet marketing strategy for your business.

In the mean time, Good Luck on your journey to success…

OR if you would like to succeed immediately to create financial freedom working only 4 hours a week, check out www.secrets2internetfortunes.com.

AND for a Limited Time, you will also receive a FREE copy of a limited number of the amazing 60 page eBook “52 Highly Profitable Instant Online Business Ideas That You Can Steal As Your Own And Start Today On A Very Tight Budget!”, which is jam packed with so many ideas you can use to instantly create an automated income for life! That’s my GIFT to You as a way of saying thank you for reading my articles.

About The Author

Terry Leslie is a very successful and world renowned authority figure in both on and off line marketing, and rapid business creation. A much sought after global speaker in the areas of internet marketing, business development, self-improvement and human peak potential training.

For more Secrets to Internet Business success, check out http://www.secrets2internetfortunes.com